'86 Alpina B7/2 Turbo Coupe dyno sheet

Post your dyno sheets, time slips and videos here.

'86 Alpina B7/2 Turbo Coupe dyno sheet

Postby J.T. on Wed Oct 29, 2008 8:39 am

Thought you guys might like to see this, for reference. This was after I installed a new AFM to correct air/fuel ratio problems. On previous runs, we had seen up to 16.4 lbs of boost. I didn't understand what was up until I found a cracked vent hose on the valve cover a couple of weeks later. Not bad power for being down 4 lbs on boost, though... ;)
Attachments
run7.jpg
6/13/08
---JT

'86 Alpina B7/2 Turbo Coupe
'89 635CSi
'99 528i Sport Premium
J.T.
 
Posts: 1
Joined: Wed Oct 29, 2008 8:24 am

Re: '86 Alpina B7/2 Turbo Coupe dyno sheet

Postby TCD on Thu Oct 30, 2008 8:02 am

Thanks for posting JT. Curve looks nice and smooth. Must be a fun driver.
Todd DeHate
1991 325ic Mtec TCD-s1 with PF Tuning MS
1986 635csi TCD-s3 Drag Car 2985lbs 12.56 @ 109 (slipping tranny)
2000 M5 - bone stock 13.08 @ 104.49
1994 325is Mtec TCD-s2 in hibernation
TCD
 
Posts: 131
Joined: Thu Jan 24, 2008 10:08 pm
Location: Milwaukee, WI


Return to Dyno / Video Library

Who is online

Users browsing this forum: No registered users and 1 guest

cron