For all who don't know, my red 335ist is broke too much to be fixed but all the parts are good I currently have a daily driver e34 335is and a rolling chell for the TCD motor.
New year....
Ok to start off the new year I have my shop almost set up I have not found an e30m3 but I found a 91 318 no sunroof with almost all parts for 5 lug e30m3 setup e34 motor, and at this point all parts are ok to use need to clean everything up. Also getting a cage it will take most all year to finish or come close That is it for know
back at it
5 posts • Page 1 of 1
back at it
by bmw335isturbo on Wed Dec 30, 2009 4:19 pm
Jason Huff
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
- bmw335isturbo
- Posts: 12
- Joined: Mon Jan 28, 2008 3:42 pm
Re: back at it
by TCD on Thu Dec 31, 2009 12:45 am
Awesome news Jason. Look forward to seeing the results.
Todd DeHate
1991 325ic Mtec TCD-s1 with PF Tuning MS
1986 635csi TCD-s3 Drag Car 2985lbs 12.56 @ 109 (slipping tranny)
2000 M5 - bone stock 13.08 @ 104.49
1994 325is Mtec TCD-s2 in hibernation
1991 325ic Mtec TCD-s1 with PF Tuning MS
1986 635csi TCD-s3 Drag Car 2985lbs 12.56 @ 109 (slipping tranny)
2000 M5 - bone stock 13.08 @ 104.49
1994 325is Mtec TCD-s2 in hibernation
- TCD
- Posts: 131
- Joined: Thu Jan 24, 2008 10:08 pm
- Location: Milwaukee, WI
Re: back at it
by bmw335isturbo on Fri Jan 01, 2010 11:58 pm
Most all my shop is up and running. I should have my TCD motor brought over from my fathers shop to dissemble and check by the end of Jan. I will keep all posted.
Jason Huff
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
- bmw335isturbo
- Posts: 12
- Joined: Mon Jan 28, 2008 3:42 pm
Re: back at it
by bmw335isturbo on Wed Apr 21, 2010 9:41 am
The past 3 months I have been working out of town no progress to report yet just some cleanup.
Jason Huff
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
- bmw335isturbo
- Posts: 12
- Joined: Mon Jan 28, 2008 3:42 pm
Re: back at it
by bmw335isturbo on Thu May 20, 2010 9:07 pm
This looks to be all the damage done to the motor from the wreck and right now the oil pan is being wielded I should be ready to re assemble clutch & pressure plate
- Attachments
-
- first look at M30turbo motor 010.jpg (2.31 MB) Viewed 199 times
Jason Huff
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
1986 B35 335is
1988 B34 335ist destroyed
1990 B34 335ist under construction TCD S2,MM head,dinan Extrude honed intake
- bmw335isturbo
- Posts: 12
- Joined: Mon Jan 28, 2008 3:42 pm
5 posts • Page 1 of 1
Return to BMW Forced Induction General Discussion
Who is online
Users browsing this forum: No registered users and 1 guest